Making the aluminium tube loose from the cardanic shaft of the tone arm.
You can see the nylon wire between the cardan shaft of the tone arm. You have to loosen the arm a little bit and be very careful. It will give you just enough room to fill in the new tone arm wires.
https://www.buildandlisten.com/turntables/thorens-td160/rewiring-the-tp16-tonearm/dff179be-fdf5-4fe7-82f7-0a239594f073.jpeg/view
https://www.buildandlisten.com/turntables/thorens-td160/rewiring-the-tp16-tonearm/dff179be-fdf5-4fe7-82f7-0a239594f073.jpeg/@@download/image/DFF179BE-FDF5-4FE7-82F7-0A239594F073.jpeg
Making the aluminium tube loose from the cardanic shaft of the tone arm.
You can see the nylon wire between the cardan shaft of the tone arm. You have to loosen the arm a little bit and be very careful. It will give you just enough room to fill in the new tone arm wires.
